Local guide + connection service, not a glass shopSan Marcos · North County San Diego, CaliforniaSheet checked November 2026
Auto Glass & Tint CA
The Laminate Sheet — a field guide to glass, film & the law in California

Sheet 05 · Films

Four film families, one honest axis: what is actually inside the film

Tint darkness is a number (VLT). Tint performance is a construction. Two films at the same 20% VLT can differ by a factor of two in heat rejection — and the cheaper one will be purple in three North County summers.

VLT = visible light transmission: the share of light that gets through. Higher number, lighter window. The blocks above are a scale, not a photograph — judge film by the meter reading and the spec sheet, never by a screen.

The families

FilmConstructionHeat behaviourFailure mode
DyedColour in an adhesive layerBlocks glare, modest heat; the dye absorbs and the cabin still cooksFades purple, bubbles as adhesive dies — the San Marcos special
MetalizedMetal particles in the filmReflects heat well, strong and durableCan interfere with phone, GPS, toll and keyless signals; mirror-like reflectivity can itself break CA rules
CarbonCarbon particles, no metalBetter IR rejection than dyed, no signal interference, matte finishCosts more; quality varies by maker more than the label suggests
CeramicNano-ceramic particles, no metal or dyeHighest IR rejection per shade — including in the clear 88% film that is the only legal front-window option in CaliforniaPrice; and exaggerated TSER claims across the industry

Reading a spec sheet without being fooled

  • VLT — light through. Legality is measured on glass + film together, with a meter, not from the box label.
  • UV rejection — near 99% on every decent film, including cheap dyed. It is not a premium feature.
  • IR rejection — quoted at different wavelengths by different brands; a single high number at one narrow band is marketing, not physics.
  • TSER (total solar energy rejected) — the most comparable single figure, measured at a stated VLT and angle. Compare TSER to TSER, at the same shade.
  • The clear-film point: in California the front side windows may only take clear, colourless film of 88% VLT or better — and a quality ceramic in that clear grade still rejects serious infrared heat. "Legal up front" does not mean "pointless up front." The full law is on the law page.

Installation truth

Film is squeegeed onto the inside surface, shrunk to curved glass with heat, and trimmed. Dust is the enemy: a proper install needs a controlled bay, which is why tint is the one service on this site that mobile operators legitimately decline or qualify — see mobile service. Cure haze for a few days is normal; bubbles that grow, edges that lift, and purple shift are warranty conversations, and written film-and-labour warranty terms are the document to keep.